BestsellerLower Extremity
Dynamic Ankle Brace
Articulating AFO with adjustable dorsiflexion assist
Now accepting direct insurance billing
Orthopedic devices, crafted around the body that wears them.
Custom orthotics, prosthetics, spinal braces, and pediatric cranial helmets — fabricated on-site by certified clinicians. From prescription to fitting in two weeks, with follow-up visits as part of your care plan.
4.9 from 1,200+ patients
FDA-listed fabrication
Avg. fabrication
14 days
On-site lab
3D scan + mill
Custom OrthoticsProstheticsSpinal BracingCranial HelmetsMobility SeatingFoot OrthoticsPediatric CareSports Bracing
Custom OrthoticsProstheticsSpinal BracingCranial HelmetsMobility SeatingFoot OrthoticsPediatric CareSports Bracing
Catalog
Seven disciplines, one fabrication lab.
Every category below is fabricated in-house from a cast or 3D scan of your anatomy. No off-the-shelf sizing, no outsourced finish work — every device leaves our lab signed by the clinician who built it.
24 products
Walk further, stand longer
Lower Extremity
Knee, ankle, and foot orthoses engineered to restore gait stability, offload painful joints, and support post-surgical recovery. Each device is fabricated from a precise cast or 3D scan of the patient anatomy, with adjustable hinges and breathable padding for all-day wear.
KAFO & AFO bracesPost-op knee immobilizersHinged joints
18 products
Restore reach and grip
Upper Extremity
From static wrist splints to dynamic elbow articulations, our upper limb orthotics stabilize fractures, protect ligament repairs, and assist neuromuscular deficits. Modular strapping accommodates swelling changes through the healing arc.
Wrist & thumb splintsElbow articulating bracesShoulder immobilizers
16 products
Alignment that holds
Spinal & Cervical
TLSO and cervical orthoses designed in collaboration with spine surgeons to control motion segments post-fusion, manage scoliosis curves, and relieve discogenic pain. Low-profile frames hide under clothing while delivering measurable corrective force.
TLSO bracesCervical collarsScoliosis management
12 products
Built for life in motion
Prosthetics
Custom prosthetic limbs fabricated around a silicone suspension liner and modular connector system. From preparatory sockets to microprocessor-enabled knees, we tune alignment, ply volume, and foot dynamics for each patient's activity level.
Below-knee & above-kneeCarbon feetMicroprocessor knees
22 products
A foundation that fits
Foot Orthotics
Semi-rigid and accommodative insoles milled from a foam or 3D-printed positive of the foot. We correct biomechanical alignment for plantar fasciitis, diabetic ulcers, and athletic overpronation, with multi-density top layers for cushioning without collapse.
Custom-milled insolesDiabetic accomodativeSport-specific
8 products
Gentle correction, early
Pediatric Cranial
Cranial remolding helmets for infants 3–18 months with positional plagiocephaly or brachycephaly. Each helmet is sculpted from a safe digital scan, with weekly growth allowances and a soft foam interior that keeps the baby comfortable through treatment.
Plagiocephaly helmetsBrachycephaly treatmentSafe 3D scanning
14 products
Comfort that travels
Mobility & Seating
Custom wheelchair seating systems, lateral trunk supports, and pressure-relief cushions mapped from a sitting pressure assessment. Modular hardware adapts as the user's posture or transfer needs change over time.
Custom seat moldsPressure-relief cushionsLateral supports
Featured devices
Built in our lab, fitted to your body.
A selection of our most prescribed devices. Each is selected to fit your needs and fabricated to your measurements.
Bestseller
ProLower Extremity
Knee Immobilizer
Post-operative long leg brace with medial-lateral stays
BestsellerSpinal & Cervical
Lumbo-Sacral Brace
Breathable TLSO with posterior panel and double-pull straps
NewSpinal & Cervical
Soft Foam Cervical Collar
Contoured foam collar with removable cover
Made to orderFoot Orthotics
Custom Foot Orthotic
Semi-rigid insole milled from a 3D foot scan
Made to orderProsthetics
Above-Knee Prosthesis
Modular transfemoral system with carbon foot
38+
Years of fabrication
14k
Devices delivered
7
Certified clinicians
4.9/5
Patient rating
How we work
From prescription to first fitting in four steps.
We keep the entire process under one roof. Your clinician assesses, casts, fabricates, and fits — no handoffs, no third-party labs, no surprises on delivery day.
01Step 1
Clinical Assessment
A board-certified orthotist-prosthetist reviews your prescription, range of motion, and functional goals to determine the right device class and components.
02Step 2
Casting or 3D Scan
We capture your anatomy with a slip cast or a structured-light 3D scan. The digital model becomes the positive mold we fabricate against.
03Step 3
Fabrication
In our on-site lab we thermoform, mill, or 3D-print the device, then assemble hardware, padding, and strapping by hand.
04Step 4
Fitting & Follow-up
You return for a dynamic fitting. We tune alignment and pressure points, then schedule follow-ups at 1 week, 1 month, and 3 months.
38
years fabricating custom orthopedic devices
About Alitura
A fabrication lab that happens to have a clinic attached.
Alitura was founded in 1987 by a single orthotist working out of a 40-square-meter workshop. Three generations of clinicians later, we operate a 600-square-meter lab with structured-light scanning, multi-axis CNC milling, and a thermoforming suite — but the principle is unchanged: every device is built for one specific body.
We do not stock off-the-shelf sizing. Even our ready-to-wear cervical collars are contoured to the patient at fitting. It is slower work, but it is the only work worth signing your name to.
- On-site fabrication lab with 3D scanning and CNC milling
- Board-certified orthotist-prosthetists on every case
- Two-year structural warranty on all custom devices
- Direct insurance billing across major providers
- Bilingual clinical staff (Arabic, English, French)
- Pediatric and adult specialty tracks
Patient stories
Devices that disappear into daily life.
“My daughter's cranial helmet was a completely different experience than I expected. The scan took five minutes, the weekly check-ins were reassuring, and the result speaks for itself.”
Lara M.
Parent, Beirut
“After my knee replacement I lived in their immobilizer for six weeks. The cold-therapy pocket alone was worth it — I never once reached for an ice pack that leaked.”
Karim S.
Post-op patient
“I'm a below-knee amputee and an avid hiker. Their carbon foot got me back on the trail within four months of my surgery. The alignment work was meticulous.”
Sami T.
Prosthetic user
Book a fitting
Tell us about your prescription. We'll handle the rest.
Send your prescription, your contact details, and a preferred time. A clinician will call within 24 hours to confirm the appointment and walk you through what to expect at your first visit.
Visit the lab
Rue du Liban 142, Ashrafieh, Beirut, Lebanon
Call us
+961 1 456 789
Email
care@alitura-ortho.com
Hours
Mon–Fri 8:30–18:00 · Sat 9:00–13:00